changing ign barrel

msteel · 22nd July 2008, 02:41 PM

hi guys
lost my keys in work last night.
ive been quoted 200 off locksmith for new key.
and quoted 50 from breakers for barrel and locks.
is it a big job to change barrel,can anybody help.
cheers

Old Bird · 22nd July 2008, 03:35 PM

What about your doors key...the new barrel key won't fit will it....
Ang x

msteel · 22nd July 2008, 03:42 PM

barrel and doors 1 key does all £50.00

Townaceclive · 22nd July 2008, 04:29 PM

Doors easy but lots of trim to remove Ign barrel I think has a pin that needs to be removed other than then simple unscrew and refit.

msteel · 22nd July 2008, 04:37 PM

cheers mate,
doors no proplem can sort.
just ign not to sure about,
taking trailer tent up to norfolk friday,so big panick at moment,
hope someone found them and handed them in?

pheasant_plucker · 22nd July 2008, 05:16 PM

You usually have to put the ignition key in and turn it to accessory before you can press the pin to pull the barrel out. It looks like you'll need the whole ignition lock assembly, drill out the shearhead bolts and just bolt the new one in with normal cap heads.

Gerry

buffallobob · 22nd July 2008, 08:06 PM

Quote:

Originally Posted by msteel

cheers mate,
doors no proplem can sort.
just ign not to sure about,
taking trailer tent up to norfolk friday,so big panick at moment,
hope someone found them and handed them in?

I have ign lock and key in van you are not that far from me if you want to or indeed if you can pick up i can run through how to do it with you on an esti here
bob

msteel · 22nd July 2008, 09:16 PM

too late
ive absolutley killed it.will need steering column with ign all ready on

owenmall · 22nd July 2008, 10:22 PM

Should have asked a couple of chavs and offer four alcopops as a reward , it would have been done in a jiffy......Owen

buffallobob · 22nd July 2008, 11:00 PM

Quote:

Originally Posted by msteel

too late
ive absolutley killed it.will need steering column with ign all ready on

Oh

bob

22nd July 2008, 02:41 PM	#1 (permalink)
msteel Join Date: Mar 2008 Location: bromley kent Posts: 47	changing ign barrel hi guys lost my keys in work last night. ive been quoted 200 off locksmith for new key. and quoted 50 from breakers for barrel and locks. is it a big job to change barrel,can anybody help. cheers

22nd July 2008, 03:35 PM	#2 (permalink)
Old Bird Join Date: Sep 2007 Posts: 3,663	What about your doors key...the new barrel key won't fit will it.... Ang x __________________ Owner of Toby Toyota Masterace Surf Super Touring. http://les-fleurs-oracle.com/

22nd July 2008, 04:29 PM	#4 (permalink)
Townaceclive Join Date: Oct 2007 Location: Bristol Posts: 4,555	Doors easy but lots of trim to remove Ign barrel I think has a pin that needs to be removed other than then simple unscrew and refit. __________________ I've won same fantastic prizes with my Treasure Island numbers! Make sure you get some in the next one! One day I will grow up, but until then......

22nd July 2008, 10:22 PM	#9 (permalink)
owenmall Join Date: Nov 2007 Location: Stretford, Manchester Posts: 2,009	Should have asked a couple of chavs and offer four alcopops as a reward , it would have been done in a jiffy......Owen __________________ One day I'll get everything done....... Define irony - bunch of idiots dancing on a plane to a song made famous by a band that died in a plane crash.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

22nd July 2008, 03:42 PM	#3 (permalink)
msteel Join Date: Mar 2008 Location: bromley kent Posts: 47	barrel and doors 1 key does all £50.00

22nd July 2008, 04:37 PM	#5 (permalink)
msteel Join Date: Mar 2008 Location: bromley kent Posts: 47	cheers mate, doors no proplem can sort. just ign not to sure about, taking trailer tent up to norfolk friday,so big panick at moment, hope someone found them and handed them in?

22nd July 2008, 05:16 PM	#6 (permalink)
pheasant_plucker Join Date: Oct 2007 Location: newton Aycliffe Posts: 207	You usually have to put the ignition key in and turn it to accessory before you can press the pin to pull the barrel out. It looks like you'll need the whole ignition lock assembly, drill out the shearhead bolts and just bolt the new one in with normal cap heads. Gerry

22nd July 2008, 09:16 PM	#8 (permalink)
msteel Join Date: Mar 2008 Location: bromley kent Posts: 47	too late ive absolutley killed it.will need steering column with ign all ready on