Pistons

[Daffy]

Would anyone have the specks for the pistons Estima including gudgeon and height? thanks if can help want to make shore I can get some before I pull down. I have 3 weeks. Don't want genuine.

[ClintJ]

Originally Posted by Daffy

Would anyone have the specks for the pistons Estima including gudgeon and height? thanks if can help want to make shore I can get some before I pull down. I have 3 weeks. Don't want genuine.

Ive got a few spare pistons that I could measure if what　you are refering to is the height from the gudgeon pin hole to the crown.. But I wont be home for a while..
I think 27mm rings a bell for the gudgeon pin diameter.. But thats of　the top of my head...
Id have a look on ebay in the uk. There was a brand new set of non gens for about $600.. the pistons gudgeons and rings..
If you were after cheap rings and bearings you could talk to my mate Mohammed from P A K I S T A N. Do a member search for MAHK..
I might be back around the 21st.. Im buying a cheap run about until I get the van back on the road..
It only consumes 2.5lt/100kms..

Clint

[Daffy]

[Thanks Clint. If when you get back, and I have had no luck, might see if I can borrow one off you - Piston that is! I'm not necessarily after a cheap one but you can bet that there is a different make that is as good, and about half the price. I Will use genuine gasket and head bolts, but I'm determined to make these things more reliable.

[ClintJ]

Originally Posted by Daffy

[Thanks Clint. If when you get back, and I have had no luck, might see if I can borrow one off you - Piston that is! I'm not necessarily after a cheap one but you can bet that there is a different make that is as good, and about half the price. I Will use genuine gasket and head bolts, but I'm determined to make these things more reliable.

Talk to my mate Mohammad.
I got excellent cond second hand pistons. 1 set
1 set of pre combustion chambers excellent cond
1 genuine toyota head gasket
1 set of toyota gen rings brand new
complete non gen bottom end bearings
all for $350aud delivered from P A K I S T A N. Im spacing the word as there is a word block on that word.
Might cost a bit more now due to the poor AUD... But thats what I done.
http://www.estimaowners.com/community/members/makh/

[Daffy]

Clint can you give me the address for the guy in P A K A S T A N still have not got around to becoming a member must do it. By the way I would be looking for O.S pistons think he can still help.

[ClintJ]

Originally Posted by Daffy

Clint can you give me the address for the guy in P A K A S T A N still have not got around to becoming a member must do it. By the way I would be looking for O.S pistons think he can still help.

Couldnt you send him a pm from that link?
OS piston, I tried last time but they have a blackmarket in second hand parts there.
Will send you a pm.

[Daffy]

No luck with link, thanks for mess