Amp Fitted
#1
Posted 15 March 2010 - 07:48 PM
Nite MX10
Nite TX50
www.BestLocalBusinessOnline.com

Today is different and tomorrow's the same.
#2
#3
Posted 15 March 2010 - 10:26 PM
E5TMA, on 15 March 2010 - 07:56 PM, said:
and out of sight of prying eyes too....
Yeah, sounds much better too, actually makes the Xtrons unit sound good when playing MP3's from my phone.
Looking at your tutorial for upgrading the speakers now!
Cheers
BBB
Nite MX10
Nite TX50
www.BestLocalBusinessOnline.com

Today is different and tomorrow's the same.
#4
Posted 19 March 2010 - 12:30 AM
I'd be stressed it would fail with the heat from the engine under it and no where for it to breath.
My 2cents anyway
#5
Posted 19 March 2010 - 06:41 AM
#6
Posted 19 March 2010 - 09:12 AM
Deevon, on 19 March 2010 - 12:30 AM, said:
I'd be stressed it would fail with the heat from the engine under it and no where for it to breath.
My 2cents anyway
No engine under there
Engine is under the bonnet on a Mk 2 Estima
Plus the seat bolts on top of the frame in the pic so there`s plenty of air around the amp
Tis also where Toyota mount the navigation DVD player & CD multi changer (Drivers side)
This post has been edited by E5TMA: 19 March 2010 - 09:17 AM




#7
Posted 19 March 2010 - 10:41 AM
#8
Posted 19 March 2010 - 10:46 AM
Good job though BBB will be watching your progress and hope it turns out nice.
#9
Posted 19 March 2010 - 12:11 PM
Sir Henry, on 19 March 2010 - 10:41 AM, said:
I did consider the heat output before installing the amp under the seat. It is true the amp does get hot, not enough to boil a kettle on but certainly noticeable if you place your hand on top of the amp's casing. I did have to play my thrash metal at full volume for half an hour before the amp got more than slightly warm though! My normal listening to Radio Four doesn't even get the amp tepid!
There is a Hessian type material cover over the underneath of the seat which had partly come off and was hanging down, which I fixed back into position ,and the cables from the pressure pad sensor for the seat belt warning light that I fixed up out of the way so they do not rest on the top of the amp. There is about 2 inches of clearance now between the top of the amp and the under surface of the seat as the seat does not rest directly on the sub frame so I think all will be okay.
The seats are leather and get most heat from the Sun - not as bad as the plastic seats I remember from childhood in my dad's Morris 1100 that would take the skin of your bare legs when wearing my school shorts !
Nite MX10
Nite TX50
www.BestLocalBusinessOnline.com

Today is different and tomorrow's the same.

Help



Promote to Article











